output.bacnet
BACnet output
type |
object |
||
properties |
|||
|
This feature is deprecated since BACnet is supporting usage of null value. Boolean value to control if OnSphere must release the priority. This allow OnSphere to relinquish the priority to allow lower priority to be used. If the control is not set, OnSphere will always keep the value set with it’s defined priority. This can be fine if the lower priority are used. This is the behavior prior to the introduction of this option. If the priority is share by other system (not recommended by BACnet), we recommend to not set this control value. The control value must be a
|
||
type |
string |
||
|
Name of the playbook that generated this file. If present, the file is managed by the Composer and may be overwritten on regeneration. Used for selective clean. Do not edit or set manually. |
||
type |
string |
||
|
The OPC UA device device.bacnet ↗️ that this owner will use to get the value. For example root.bacnet.device1 could be the OnSphere path of the BACnet device. |
||
type |
string |
||
|
A BACnet object represents a reading/writing value. This object has two different methods to be used:
see writing values ↗️ or generic documentation ↗️ ## Warning Some objects use the standard adapter, but some defined objects may require a different adapter; in such cases, use a RAW type instead of the defined method. ## Not supported list The following classes are not supported:
|
||
oneOf |
|||
|
Set the priority of the output from 1 (highest) to 16 (lowest and default). The higher priority will not allow the lower to set the value. There are default descriptions ↗️ for some of the levels (1,2,5,6,8). The others may have a description depending on the supplier of the PLC. Default value is [“LEVEL_16”] |
||
type |
string |
||
enum |
LEVEL_1_MANUAL_LIFE_SAFETY, LEVEL_2_AUTOMATIC_LIFE_SAFETY, LEVEL_3, LEVEL_4, LEVEL_5_CRITICAL_EQUIPMENT_CONTROL, LEVEL_6_MINIMUM_ON_OFF, LEVEL_7, LEVEL_8_MANUAL_OPERATOR, LEVEL_9, LEVEL_10, LEVEL_11, LEVEL_12, LEVEL_13, LEVEL_14, LEVEL_15, LEVEL_16 |
||
default |
LEVEL_16 |
||
|
The id of the template to use for this file |
||
type |
string |
||
|
The variables and their values to be replaced from the template |
||
type |
object |
||
additionalProperties |
|||
|
The variables files to use to replace the variables. The first file of the list will take precedence over the following one. Template variables take precedence over the contents of the files. |
||
type |
array |
||
items |
type |
string |
|
additionalProperties |
False |
||
RAW
type |
object |
|
properties |
||
|
type |
string |
enum |
RAW |
|
default |
RAW |
|
|
This adapter is used when a write request is executed (for example, as a callback). It is not used when reading a value. |
|
type |
string |
|
enum |
BOOLEAN, BINARY_PV, SIGNED_INTEGER, UNSIGNED_INTEGER, REAL, DOUBLE, OCTET_STRING, CHARACTER_STRING_ANSI_X34, CHARACTER_STRING_IBM_MS_DBCS, CHARACTER_STRING_JIS_C6226, CHARACTER_STRING_ISO10646_UCS4, CHARACTER_STRING_ISO10646_UCS2, BIT_STRING, TIME, DATE, DATE_TIME, DATE_RANGE, TIMESTAMP_TIME, TIMESTAMP_SEQUENCE, TIMESTAMP_DATE_TIME, SHED_LEVEL_DATUM, SHED_LEVEL_REAL, OBJECT_PROPERTY_REFERENCE, ADDRESS, VALUE_SOURCE_DEVICE_OBJECT_REFERENCE, VALUE_SOURCE_ADDRESS, DEVICE_OBJECT_REFERENCE, CHANNEL_VALUE_NULL, CHANNEL_VALUE_REAL, CHANNEL_VALUE_UNSIGNED_INTEGER, CHANNEL_VALUE_BOOLEAN, CHANNEL_VALUE_SIGNED_INTEGER, CHANNEL_VALUE_DOUBLE, CHANNEL_VALUE_TIME, CHANNEL_VALUE_CHARACTER_STRING, CHANNEL_VALUE_OCTET_STRING, CHANNEL_VALUE_BIT_STRING, CHANNEL_VALUE_DATE, OPTIONAL_UNSIGNED, OPTIONAL_REAL, OPTIONAL_BINARY_PV, OPTIONAL_CHARACTER_STRING, STATUS_FLAGS, ADDRESS_BINDING, PRESCALE, SCALE_REAL, SCALE_SIGNED, RECIPIENT_OBJECT_IDENTIFIER, RECIPIENT_ADDRESS, NULL, OBJECT_IDENTIFIER, NOTIFY_TYPE, OBJECT_TYPE, SHED_STATE, EVENT_STATE, RELIABILITY, PROPERTY_IDENTIFIER, ACCESS_EVENT, AUTHENTICATION_STATUS, AUTHORIZATION_MODE, WRITE_STATUS, ENGINEERING_UNITS, PROGRAM_REQUEST, PROGRAM_STATE, PROGRAM_ERROR, LIFE_SAFETY_STATE, MAINTENANCE, LIFE_SAFETY_MODE, LIFE_SAFETY_OPERATION, SILENCED_STATE, EVENT_TYPE, FAULT_TYPE, LIFT_GROUP_MODE, ACTION, ACCESS_CREDENTIAL_DISABLE, BINARY_P_V, AUTHORIZATION_EXEMPTION, ACCESS_CREDENTIAL_DISABLE_REASON, ACCESS_USER_TYPE, NODE_TYPE, RELATIONSHIP, SECURITY_LEVEL, POLARITY, BINARY_LIGHTING_P_V, LIFT_CAR_DIRECTION, LIFT_CAR_DOOR_COMMAND, DOOR_STATUS, LIFT_CAR_DRIVE_STATUS, LIFT_CAR_MODE, LIFT_FAULT, RESTART_REASON, BACKUP_STATE, SEGMENTATION, DEVICE_STATUS, VT_CLASS, ACCESS_ZONE_OCCUPANCY_STATE, ACCESS_PASSBACK_MODE, LOGGING_TYPE, TIMER_STATE, TIMER_TRANSITION, FILE_ACCESS_METHOD, PROTOCOL_LEVEL, I_P_MODE, NETWORK_PORT_COMMAND, NETWORK_NUMBER_QUALITY, NETWORK_TYPE, LIGHTING_TRANSITION, LIGHTING_IN_PROGRESS, DOOR_ALARM_STATE, DOOR_VALUE, LOCK_STATUS, DOOR_SECURED_STATUS, ESCALATOR_MODE, ESCALATOR_FAULT, ESCALATOR_OPERATION_DIRECTION |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
It represents the various types of objects defined in the BACnet protocol. Each type corresponds to a specific kind of data point in a building automation system. These types are used to categorize and manage different kinds of data and control points. For example an ANALOG_INPUT represents a point such as a sensor that provides a range of values (e.g., temperature, humidity). |
|
type |
integer |
|
maximum |
1023 |
|
minimum |
0 |
|
|
This defines the different properties of BACnet objects that can be accessed or manipulated. Each property corresponds to a specific attribute or state of a BACnet object. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
additionalProperties |
False |
|
LOAD_CONTROL
type |
object |
|
properties |
||
|
type |
string |
enum |
LOAD_CONTROL |
|
default |
LOAD_CONTROL |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
ACKED_TRANSITIONS, EVENT_TIME_STAMPS, ENABLE, NOTIFY_TYPE, OBJECT_IDENTIFIER, OBJECT_NAME, START_TIME, OBJECT_TYPE, NOTIFICATION_CLASS, ACTUAL_SHED_LEVEL, PRESENT_VALUE, DUTY_WINDOW, EXPECTED_SHED_LEVEL, FULL_DUTY_BASELINE, REQUESTED_SHED_LEVEL, SHED_DURATION, DESCRIPTION, SHED_LEVEL_DESCRIPTIONS, SHED_LEVELS, STATE_DESCRIPTION, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, EVENT_ALGORITHM_INHIBIT, EVENT_ENABLE, EVENT_ALGORITHM_INHIBIT_REF, EVENT_STATE, TIME_DELAY_NORMAL, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, PROFILE_NAME, STATUS_FLAGS, TIME_DELAY, VALUE_SOURCE, PROPERTY_LIST |
|
additionalProperties |
False |
|
NOTIFICATION_FORWARDER
type |
object |
|
properties |
||
|
type |
string |
enum |
NOTIFICATION_FORWARDER |
|
default |
NOTIFICATION_FORWARDER |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, LOCAL_FORWARDING_ONLY, PROFILE_NAME, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, STATUS_FLAGS, OUT_OF_SERVICE, PROPERTY_LIST, DESCRIPTION |
|
additionalProperties |
False |
|
ACCESS_POINT
type |
object |
|
properties |
||
|
type |
string |
enum |
ACCESS_POINT |
|
default |
ACCESS_POINT |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
ZONE_FROM, ZONE_TO, ACCESS_EVENT_TAG, VERIFICATION_TIME, NOTIFY_TYPE, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, OUT_OF_SERVICE, PRIORITY_FOR_WRITING, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, EVENT_ALGORITHM_INHIBIT, EVENT_ALGORITHM_INHIBIT_REF, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, STATUS_FLAGS, PROPERTY_LIST, ACCESS_ALARM_EVENTS, ACCESS_DOORS, ACCESS_EVENT, ACCESS_EVENT_CREDENTIAL, ACCESS_EVENT_TIME, ACCESS_TRANSACTION_EVENTS, ACCOMPANIMENT_TIME, ACTIVE_AUTHENTICATION_POLICY, ACKED_TRANSITIONS, EVENT_TIME_STAMPS, AUTHENTICATION_POLICY_NAMES, AUTHENTICATION_STATUS, AUTHORIZATION_MODE, FAILED_ATTEMPT_EVENTS, FAILED_ATTEMPTS, NOTIFICATION_CLASS, FAILED_ATTEMPTS_TIME, LOCKOUT, LOCKOUT_RELINQUISH_TIME, DESCRIPTION, MAX_FAILED_ATTEMPTS, MUSTER_POINT, NUMBER_OF_AUTHENTICATION_POLICIES, OCCUPANCY_COUNT_ADJUST, EVENT_ENABLE, EVENT_STATE, OCCUPANCY_LOWER_LIMIT_ENFORCED, PROFILE_NAME, OCCUPANCY_UPPER_LIMIT_ENFORCED, THREAT_LEVEL, TRANSACTION_NOTIFICATION_CLASS |
|
additionalProperties |
False |
|
AVERAGING
type |
object |
|
properties |
||
|
type |
string |
enum |
AVERAGING |
|
default |
AVERAGING |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
PROFILE_LOCATION, MAXIMUM_VALUE, MINIMUM_VALUE, PROFILE_NAME, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, VALID_SAMPLES, WINDOW_INTERVAL, PROPERTY_LIST, WINDOW_SAMPLES, MAXIMUM_VALUE_TIMESTAMP, MINIMUM_VALUE_TIMESTAMP, VARIANCE_VALUE, DESCRIPTION, ATTEMPTED_SAMPLES, AVERAGE_VALUE |
|
additionalProperties |
False |
|
MULTI_STATE_OUTPUT
type |
object |
|
properties |
||
|
type |
string |
enum |
MULTI_STATE_OUTPUT |
|
default |
MULTI_STATE_OUTPUT |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
ACKED_TRANSITIONS, EVENT_TIME_STAMPS, INTERFACE_VALUE, NOTIFY_TYPE, NUMBER_OF_STATES, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, OUT_OF_SERVICE, NOTIFICATION_CLASS, PRESENT_VALUE, DESCRIPTION, DEVICE_TYPE, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, EVENT_ALGORITHM_INHIBIT, EVENT_ENABLE, EVENT_ALGORITHM_INHIBIT_REF, EVENT_STATE, TIME_DELAY_NORMAL, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, RELINQUISH_DEFAULT, FEEDBACK_VALUE, PROFILE_NAME, STATE_TEXT, COMMAND_TIME_ARRAY, STATUS_FLAGS, CURRENT_COMMAND_PRIORITY, LAST_COMMAND_TIME, TIME_DELAY, VALUE_SOURCE, VALUE_SOURCE_ARRAY, PROPERTY_LIST |
|
additionalProperties |
False |
|
CHANNEL
type |
object |
|
properties |
||
|
type |
string |
enum |
CHANNEL |
|
default |
CHANNEL |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
ACKED_TRANSITIONS, EVENT_TIME_STAMPS, NOTIFY_TYPE, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, OUT_OF_SERVICE, NOTIFICATION_CLASS, DESCRIPTION, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, EVENT_ENABLE, EVENT_STATE, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, PROFILE_NAME, ALLOW_GROUP_DELAY_INHIBIT, CHANNEL_NUMBER, STATUS_FLAGS, CONTROL_GROUPS, EXECUTION_DELAY, LAST_PRIORITY, VALUE_SOURCE, WRITE_STATUS, PROPERTY_LIST |
|
additionalProperties |
False |
|
LARGE_ANALOG_VALUE
type |
object |
|
properties |
||
|
type |
string |
enum |
LARGE_ANALOG_VALUE |
|
default |
LARGE_ANALOG_VALUE |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
ACKED_TRANSITIONS, MAX_PRES_VALUE, EVENT_TIME_STAMPS, FAULT_HIGH_LIMIT, MIN_PRES_VALUE, FAULT_LOW_LIMIT, NOTIFY_TYPE, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, OUT_OF_SERVICE, NOTIFICATION_CLASS, PRESENT_VALUE, COV_INCREMENT, DEADBAND, DESCRIPTION, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, EVENT_ALGORITHM_INHIBIT, EVENT_ENABLE, EVENT_ALGORITHM_INHIBIT_REF, EVENT_STATE, TIME_DELAY_NORMAL, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, RELINQUISH_DEFAULT, PROFILE_NAME, RESOLUTION, HIGH_LIMIT, COMMAND_TIME_ARRAY, STATUS_FLAGS, CURRENT_COMMAND_PRIORITY, LAST_COMMAND_TIME, TIME_DELAY, VALUE_SOURCE, VALUE_SOURCE_ARRAY, PROPERTY_LIST, LIMIT_ENABLE, UNITS, LOW_LIMIT |
|
additionalProperties |
False |
|
PROGRAM
type |
object |
|
properties |
||
|
type |
string |
enum |
PROGRAM |
|
default |
PROGRAM |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
ACKED_TRANSITIONS, EVENT_TIME_STAMPS, NOTIFY_TYPE, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, OUT_OF_SERVICE, NOTIFICATION_CLASS, PROGRAM_CHANGE, PROGRAM_LOCATION, PROGRAM_STATE, DESCRIPTION, DESCRIPTION_OF_HALT, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, EVENT_ENABLE, REASON_FOR_HALT, EVENT_STATE, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, PROFILE_NAME, STATUS_FLAGS, INSTANCE_OF, PROPERTY_LIST |
|
additionalProperties |
False |
|
LIFE_SAFETY_ZONE
type |
object |
|
properties |
||
|
type |
string |
enum |
LIFE_SAFETY_ZONE |
|
default |
LIFE_SAFETY_ZONE |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
ACKED_TRANSITIONS, EVENT_TIME_STAMPS, ALARM_VALUES, NOTIFY_TYPE, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, OUT_OF_SERVICE, NOTIFICATION_CLASS, PRESENT_VALUE, DESCRIPTION, MAINTENANCE_REQUIRED, DEVICE_TYPE, EVENT_MESSAGE_TEXTS, MEMBER_OF, MODE, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, OPERATION_EXPECTED, EVENT_ALGORITHM_INHIBIT, EVENT_ENABLE, EVENT_ALGORITHM_INHIBIT_REF, SILENCED, TRACKING_VALUE, EVENT_STATE, TIME_DELAY_NORMAL, RELIABILITY_EVALUATION_INHIBIT, ZONE_MEMBERS, PROFILE_LOCATION, LIFE_SAFETY_ALARM_VALUES, RELIABILITY, FAULT_VALUES, PROFILE_NAME, STATUS_FLAGS, ACCEPTED_MODES, TIME_DELAY, VALUE_SOURCE, PROPERTY_LIST |
|
additionalProperties |
False |
|
EVENT_ENROLLMENT
type |
object |
|
properties |
||
|
type |
string |
enum |
EVENT_ENROLLMENT |
|
default |
EVENT_ENROLLMENT |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
ACKED_TRANSITIONS, EVENT_TIME_STAMPS, NOTIFY_TYPE, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, NOTIFICATION_CLASS, DESCRIPTION, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, EVENT_ALGORITHM_INHIBIT, EVENT_ENABLE, EVENT_ALGORITHM_INHIBIT_REF, EVENT_STATE, TIME_DELAY_NORMAL, EVENT_TYPE, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, FAULT_TYPE, PROFILE_NAME, STATUS_FLAGS, PROPERTY_LIST |
|
additionalProperties |
False |
|
ELEVATOR_GROUP
type |
object |
|
properties |
||
|
type |
string |
enum |
ELEVATOR_GROUP |
|
default |
ELEVATOR_GROUP |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
PROFILE_LOCATION, PROFILE_NAME, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, GROUP_ID, GROUP_MODE, PROPERTY_LIST, GROUP_MEMBERS, MACHINE_ROOM_ID, DESCRIPTION |
|
additionalProperties |
False |
|
ANALOG_OUTPUT
type |
object |
|
properties |
||
|
type |
string |
enum |
ANALOG_OUTPUT |
|
default |
ANALOG_OUTPUT |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
ACKED_TRANSITIONS, MAX_PRES_VALUE, EVENT_TIME_STAMPS, INTERFACE_VALUE, MIN_PRES_VALUE, NOTIFY_TYPE, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, OUT_OF_SERVICE, NOTIFICATION_CLASS, PRESENT_VALUE, COV_INCREMENT, DEADBAND, DESCRIPTION, DEVICE_TYPE, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, EVENT_ALGORITHM_INHIBIT, EVENT_ENABLE, EVENT_ALGORITHM_INHIBIT_REF, EVENT_STATE, TIME_DELAY_NORMAL, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, RELINQUISH_DEFAULT, PROFILE_NAME, RESOLUTION, HIGH_LIMIT, COMMAND_TIME_ARRAY, STATUS_FLAGS, CURRENT_COMMAND_PRIORITY, LAST_COMMAND_TIME, TIME_DELAY, VALUE_SOURCE, VALUE_SOURCE_ARRAY, PROPERTY_LIST, LIMIT_ENABLE, UNITS, LOW_LIMIT |
|
additionalProperties |
False |
|
LOOP
type |
object |
|
properties |
||
|
type |
string |
enum |
LOOP |
|
default |
LOOP |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
MINIMUM_OUTPUT, NOTIFY_TYPE, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, OUT_OF_SERVICE, OUTPUT_UNITS, PRESENT_VALUE, PRIORITY_FOR_WRITING, PROPORTIONAL_CONSTANT, PROPORTIONAL_CONSTANT_UNITS, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, EVENT_ALGORITHM_INHIBIT, EVENT_ALGORITHM_INHIBIT_REF, TIME_DELAY_NORMAL, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, SETPOINT, STATUS_FLAGS, TIME_DELAY, PROPERTY_LIST, UPDATE_INTERVAL, ACKED_TRANSITIONS, ACTION, EVENT_TIME_STAMPS, LOW_DIFF_LIMIT, BIAS, NOTIFICATION_CLASS, CONTROLLED_VARIABLE_REFERENCE, CONTROLLED_VARIABLE_UNITS, CONTROLLED_VARIABLE_VALUE, COV_INCREMENT, DEADBAND, DERIVATIVE_CONSTANT, DERIVATIVE_CONSTANT_UNITS, DESCRIPTION, ERROR_LIMIT, EVENT_ENABLE, EVENT_STATE, PROFILE_NAME, INTEGRAL_CONSTANT, INTEGRAL_CONSTANT_UNITS, MANIPULATED_VARIABLE_REFERENCE, MAXIMUM_OUTPUT |
|
additionalProperties |
False |
|
DATETIME_VALUE
type |
object |
|
properties |
||
|
type |
string |
enum |
DATETIME_VALUE |
|
default |
DATETIME_VALUE |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
ACKED_TRANSITIONS, EVENT_TIME_STAMPS, NOTIFY_TYPE, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, OUT_OF_SERVICE, NOTIFICATION_CLASS, PRESENT_VALUE, IS_UTC, DESCRIPTION, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, EVENT_ENABLE, EVENT_STATE, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, RELINQUISH_DEFAULT, PROFILE_NAME, COMMAND_TIME_ARRAY, STATUS_FLAGS, CURRENT_COMMAND_PRIORITY, LAST_COMMAND_TIME, VALUE_SOURCE, VALUE_SOURCE_ARRAY, PROPERTY_LIST |
|
additionalProperties |
False |
|
GROUP
type |
object |
|
properties |
||
|
type |
string |
enum |
GROUP |
|
default |
GROUP |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
OBJECT_TYPE, PROPERTY_LIST, PROFILE_LOCATION, PROFILE_NAME, OBJECT_IDENTIFIER, DESCRIPTION, OBJECT_NAME |
|
additionalProperties |
False |
|
ACCESS_CREDENTIAL
type |
object |
|
properties |
||
|
type |
string |
enum |
ACCESS_CREDENTIAL |
|
default |
ACCESS_CREDENTIAL |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
USES_REMAINING, GLOBAL_IDENTIFIER, BELONGS_TO, CREDENTIAL_DISABLE, CREDENTIAL_STATUS, OBJECT_IDENTIFIER, DAYS_REMAINING, OBJECT_NAME, EXPIRATION_TIME, OBJECT_TYPE, EXTENDED_TIME_ENABLE, LAST_ACCESS_EVENT, LAST_ACCESS_POINT, LAST_USE_TIME, DESCRIPTION, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, PROFILE_NAME, AUTHORIZATION_EXEMPTIONS, STATUS_FLAGS, REASON_FOR_DISABLE, THREAT_AUTHORITY, PROPERTY_LIST, ABSENTEE_LIMIT, TRACE_FLAG, ACTIVATION_TIME |
|
additionalProperties |
False |
|
BITSTRING_VALUE
type |
object |
|
properties |
||
|
type |
string |
enum |
BITSTRING_VALUE |
|
default |
BITSTRING_VALUE |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
ACKED_TRANSITIONS, EVENT_TIME_STAMPS, ALARM_VALUES, NOTIFY_TYPE, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, OUT_OF_SERVICE, NOTIFICATION_CLASS, PRESENT_VALUE, BIT_MASK, BIT_TEXT, DESCRIPTION, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, EVENT_ALGORITHM_INHIBIT, EVENT_ENABLE, EVENT_ALGORITHM_INHIBIT_REF, EVENT_STATE, TIME_DELAY_NORMAL, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, RELINQUISH_DEFAULT, PROFILE_NAME, COMMAND_TIME_ARRAY, STATUS_FLAGS, CURRENT_COMMAND_PRIORITY, LAST_COMMAND_TIME, TIME_DELAY, VALUE_SOURCE, VALUE_SOURCE_ARRAY, PROPERTY_LIST |
|
additionalProperties |
False |
|
ACCESS_USER
type |
object |
|
properties |
||
|
type |
string |
enum |
ACCESS_USER |
|
default |
ACCESS_USER |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
MEMBER_OF, GLOBAL_IDENTIFIER, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, PROFILE_NAME, CREDENTIALS, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, STATUS_FLAGS, PROPERTY_LIST, USER_EXTERNAL_IDENTIFIER, USER_INFORMATION_REFERENCE, DESCRIPTION, USER_NAME, USER_TYPE, MEMBERS |
|
additionalProperties |
False |
|
DATE_PATTERN_VALUE
type |
object |
|
properties |
||
|
type |
string |
enum |
DATE_PATTERN_VALUE |
|
default |
DATE_PATTERN_VALUE |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
ACKED_TRANSITIONS, EVENT_TIME_STAMPS, NOTIFY_TYPE, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, OUT_OF_SERVICE, NOTIFICATION_CLASS, PRESENT_VALUE, DESCRIPTION, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, EVENT_ENABLE, EVENT_STATE, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, RELINQUISH_DEFAULT, PROFILE_NAME, COMMAND_TIME_ARRAY, STATUS_FLAGS, CURRENT_COMMAND_PRIORITY, LAST_COMMAND_TIME, VALUE_SOURCE, VALUE_SOURCE_ARRAY, PROPERTY_LIST |
|
additionalProperties |
False |
|
NOTIFICATION_CLASS
type |
object |
|
properties |
||
|
type |
string |
enum |
NOTIFICATION_CLASS |
|
default |
NOTIFICATION_CLASS |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
EVENT_MESSAGE_TEXTS, ACKED_TRANSITIONS, EVENT_MESSAGE_TEXTS_CONFIG, ACK_REQUIRED, EVENT_DETECTION_ENABLE, EVENT_TIME_STAMPS, EVENT_ENABLE, EVENT_STATE, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, NOTIFY_TYPE, PROFILE_NAME, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, STATUS_FLAGS, NOTIFICATION_CLASS, PROPERTY_LIST, PRIORITY, DESCRIPTION |
|
additionalProperties |
False |
|
LIFE_SAFETY_POINT
type |
object |
|
properties |
||
|
type |
string |
enum |
LIFE_SAFETY_POINT |
|
default |
LIFE_SAFETY_POINT |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
ACKED_TRANSITIONS, EVENT_TIME_STAMPS, ALARM_VALUES, NOTIFY_TYPE, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, OUT_OF_SERVICE, NOTIFICATION_CLASS, PRESENT_VALUE, DESCRIPTION, DIRECT_READING, MAINTENANCE_REQUIRED, DEVICE_TYPE, EVENT_MESSAGE_TEXTS, MEMBER_OF, MODE, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, OPERATION_EXPECTED, EVENT_ALGORITHM_INHIBIT, SETTING, EVENT_ENABLE, EVENT_ALGORITHM_INHIBIT_REF, SILENCED, TRACKING_VALUE, EVENT_STATE, TIME_DELAY_NORMAL, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, LIFE_SAFETY_ALARM_VALUES, RELIABILITY, FAULT_VALUES, PROFILE_NAME, STATUS_FLAGS, ACCEPTED_MODES, TIME_DELAY, VALUE_SOURCE, PROPERTY_LIST, UNITS |
|
additionalProperties |
False |
|
STRUCTURED_VIEW
type |
object |
|
properties |
||
|
type |
string |
enum |
STRUCTURED_VIEW |
|
default |
STRUCTURED_VIEW |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
PROFILE_LOCATION, SUBORDINATE_NODE_TYPES, PROFILE_NAME, SUBORDINATE_RELATIONSHIPS, DEFAULT_SUBORDINATE_RELATIONSHIP, OBJECT_IDENTIFIER, REPRESENTS, OBJECT_NAME, OBJECT_TYPE, NODE_SUBTYPE, NODE_TYPE, SUBORDINATE_ANNOTATIONS, SUBORDINATE_LIST, PROPERTY_LIST, DESCRIPTION |
|
additionalProperties |
False |
|
INTEGER_VALUE
type |
object |
|
properties |
||
|
type |
string |
enum |
INTEGER_VALUE |
|
default |
INTEGER_VALUE |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
ACKED_TRANSITIONS, MAX_PRES_VALUE, EVENT_TIME_STAMPS, FAULT_HIGH_LIMIT, MIN_PRES_VALUE, FAULT_LOW_LIMIT, NOTIFY_TYPE, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, OUT_OF_SERVICE, NOTIFICATION_CLASS, PRESENT_VALUE, COV_INCREMENT, DEADBAND, DESCRIPTION, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, EVENT_ALGORITHM_INHIBIT, EVENT_ENABLE, EVENT_ALGORITHM_INHIBIT_REF, EVENT_STATE, TIME_DELAY_NORMAL, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, RELINQUISH_DEFAULT, PROFILE_NAME, RESOLUTION, HIGH_LIMIT, COMMAND_TIME_ARRAY, STATUS_FLAGS, CURRENT_COMMAND_PRIORITY, LAST_COMMAND_TIME, TIME_DELAY, VALUE_SOURCE, VALUE_SOURCE_ARRAY, PROPERTY_LIST, LIMIT_ENABLE, UNITS, LOW_LIMIT |
|
additionalProperties |
False |
|
NETWORK_SECURITY
type |
object |
|
properties |
||
|
type |
string |
enum |
NETWORK_SECURITY |
|
default |
NETWORK_SECURITY |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
PROFILE_LOCATION, BASE_DEVICE_SECURITY_POLICY, DISTRIBUTION_KEY_REVISION, PROFILE_NAME, DO_NOT_HIDE, OBJECT_IDENTIFIER, LAST_KEY_SERVER, OBJECT_NAME, PACKET_REORDER_TIME, SECURITY_PDU_TIMEOUT, OBJECT_TYPE, SECURITY_TIME_WINDOW, SUPPORTED_SECURITY_ALGORITHMS, UPDATE_KEY_SET_TIMEOUT, PROPERTY_LIST, DESCRIPTION |
|
additionalProperties |
False |
|
BINARY_LIGHTING_OUTPUT
type |
object |
|
properties |
||
|
type |
string |
enum |
BINARY_LIGHTING_OUTPUT |
|
default |
BINARY_LIGHTING_OUTPUT |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
POWER, ACKED_TRANSITIONS, EGRESS_ACTIVE, EVENT_TIME_STAMPS, STRIKE_COUNT, TIME_OF_STRIKE_COUNT_RESET, NOTIFY_TYPE, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, OUT_OF_SERVICE, NOTIFICATION_CLASS, POLARITY, PRESENT_VALUE, DESCRIPTION, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, ELAPSED_ACTIVE_TIME, EVENT_DETECTION_ENABLE, EVENT_ENABLE, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, FEEDBACK_VALUE, RELINQUISH_DEFAULT, PROFILE_NAME, COMMAND_TIME_ARRAY, STATUS_FLAGS, CURRENT_COMMAND_PRIORITY, LAST_COMMAND_TIME, VALUE_SOURCE, TIME_OF_ACTIVE_TIME_RESET, VALUE_SOURCE_ARRAY, PROPERTY_LIST, BLINK_WARN_ENABLE, EGRESS_TIME |
|
additionalProperties |
False |
|
LIFT
type |
object |
|
properties |
||
|
type |
string |
enum |
LIFT |
|
default |
LIFT |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
CAR_ASSIGNED_DIRECTION, CAR_DOOR_COMMAND, CAR_DOOR_STATUS, CAR_DOOR_TEXT, CAR_DOOR_ZONE, CAR_DRIVE_STATUS, CAR_LOAD, CAR_LOAD_UNITS, CAR_MODE, NOTIFY_TYPE, CAR_MOVING_DIRECTION, CAR_POSITION, OBJECT_IDENTIFIER, ELEVATOR_GROUP, ENERGY_METER, OBJECT_NAME, ENERGY_METER_REF, OBJECT_TYPE, FAULT_SIGNALS, FLOOR_TEXT, GROUP_ID, OUT_OF_SERVICE, HIGHER_DECK, INSTALLATION_ID, LOWER_DECK, MAKING_CAR_CALL, NEXT_STOPPING_FLOOR, PASSENGER_ALARM, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, EVENT_ALGORITHM_INHIBIT, EVENT_ALGORITHM_INHIBIT_REF, TIME_DELAY_NORMAL, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, STATUS_FLAGS, TIME_DELAY, PROPERTY_LIST, ACKED_TRANSITIONS, EVENT_TIME_STAMPS, NOTIFICATION_CLASS, DESCRIPTION, EVENT_ENABLE, EVENT_STATE, PROFILE_NAME |
|
additionalProperties |
False |
|
ACCUMULATOR
type |
object |
|
properties |
||
|
type |
string |
enum |
ACCUMULATOR |
|
default |
ACCUMULATOR |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
VALUE_SET, VALUE_CHANGE_TIME, ACKED_TRANSITIONS, MAX_PRES_VALUE, EVENT_TIME_STAMPS, FAULT_HIGH_LIMIT, FAULT_LOW_LIMIT, NOTIFY_TYPE, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, OUT_OF_SERVICE, NOTIFICATION_CLASS, PRESENT_VALUE, DESCRIPTION, DEVICE_TYPE, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, EVENT_ALGORITHM_INHIBIT, EVENT_ENABLE, EVENT_ALGORITHM_INHIBIT_REF, EVENT_STATE, TIME_DELAY_NORMAL, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, PROFILE_NAME, HIGH_LIMIT, STATUS_FLAGS, TIME_DELAY, PROPERTY_LIST, LIMIT_ENABLE, UNITS, LIMIT_MONITORING_INTERVAL, LOGGING_OBJECT, PRESCALE, PULSE_RATE, LOW_LIMIT, VALUE_BEFORE_CHANGE |
|
additionalProperties |
False |
|
DEVICE
type |
object |
|
properties |
||
|
type |
string |
enum |
DEVICE |
|
default |
DEVICE |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
MAX_INFO_FRAMES, MAX_MASTER, ALIGN_INTERVALS, INTERVAL_OFFSET, LAST_RESTART_REASON, MODEL_NAME, NOTIFY_TYPE, NUMBER_OF_APDU_RETRIES, OBJECT_IDENTIFIER, TIME_OF_DEVICE_RESTART, OBJECT_LIST, TIME_SYNCHRONIZATION_INTERVAL, OBJECT_NAME, OBJECT_TYPE, STRUCTURED_OBJECT_LIST, BACKUP_AND_RESTORE_STATE, BACKUP_PREPARATION_TIME, RESTORE_COMPLETION_TIME, RESTORE_PREPARATION_TIME, EVENT_MESSAGE_TEXTS, PROTOCOL_OBJECT_TYPES_SUPPORTED, EVENT_MESSAGE_TEXTS_CONFIG, PROTOCOL_SERVICES_SUPPORTED, EVENT_DETECTION_ENABLE, PROTOCOL_VERSION, DEPLOYED_PROFILE_LOCATION, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, SEGMENTATION_SUPPORTED, STATUS_FLAGS, SYSTEM_STATUS, PROPERTY_LIST, SERIAL_NUMBER, UTC_OFFSET, VENDOR_IDENTIFIER, VENDOR_NAME, VT_CLASSES_SUPPORTED, ACKED_TRANSITIONS, EVENT_TIME_STAMPS, APDU_SEGMENT_TIMEOUT, PROTOCOL_REVISION, APDU_TIMEOUT, APPLICATION_SOFTWARE_VERSION, NOTIFICATION_CLASS, DAYLIGHT_SAVINGS_STATUS, BACKUP_FAILURE_TIMEOUT, CONFIGURATION_FILES, DATABASE_REVISION, DESCRIPTION, LAST_RESTORE_TIME, DEVICE_ADDRESS_BINDING, EVENT_ENABLE, EVENT_STATE, MAX_SEGMENTS_ACCEPTED, PROFILE_NAME, AUTO_SLAVE_DISCOVERY, FIRMWARE_REVISION, SLAVE_PROXY_ENABLE, LOCAL_DATE, LOCAL_TIME, LOCATION, MAX_APDU_LENGTH_ACCEPTED |
|
additionalProperties |
False |
|
ACCESS_RIGHTS
type |
object |
|
properties |
||
|
type |
string |
enum |
ACCESS_RIGHTS |
|
default |
ACCESS_RIGHTS |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
GLOBAL_IDENTIFIER, ENABLE, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, PROFILE_NAME, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, STATUS_FLAGS, PROPERTY_LIST, DESCRIPTION, ACCOMPANIMENT |
|
additionalProperties |
False |
|
DATETIME_PATTERN_VALUE
type |
object |
|
properties |
||
|
type |
string |
enum |
DATETIME_PATTERN_VALUE |
|
default |
DATETIME_PATTERN_VALUE |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
ACKED_TRANSITIONS, EVENT_TIME_STAMPS, NOTIFY_TYPE, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, OUT_OF_SERVICE, NOTIFICATION_CLASS, PRESENT_VALUE, IS_UTC, DESCRIPTION, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, EVENT_ENABLE, EVENT_STATE, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, RELINQUISH_DEFAULT, PROFILE_NAME, COMMAND_TIME_ARRAY, STATUS_FLAGS, CURRENT_COMMAND_PRIORITY, LAST_COMMAND_TIME, VALUE_SOURCE, VALUE_SOURCE_ARRAY, PROPERTY_LIST |
|
additionalProperties |
False |
|
BINARY_OUTPUT
type |
object |
|
properties |
||
|
type |
string |
enum |
BINARY_OUTPUT |
|
default |
BINARY_OUTPUT |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
ACKED_TRANSITIONS, MINIMUM_OFF_TIME, EVENT_TIME_STAMPS, MINIMUM_ON_TIME, INTERFACE_VALUE, ACTIVE_TEXT, NOTIFY_TYPE, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, CHANGE_OF_STATE_COUNT, CHANGE_OF_STATE_TIME, OUT_OF_SERVICE, NOTIFICATION_CLASS, POLARITY, PRESENT_VALUE, DESCRIPTION, DEVICE_TYPE, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, ELAPSED_ACTIVE_TIME, EVENT_DETECTION_ENABLE, EVENT_ALGORITHM_INHIBIT, EVENT_ENABLE, EVENT_ALGORITHM_INHIBIT_REF, EVENT_STATE, TIME_DELAY_NORMAL, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, RELINQUISH_DEFAULT, FEEDBACK_VALUE, PROFILE_NAME, INACTIVE_TEXT, COMMAND_TIME_ARRAY, STATUS_FLAGS, CURRENT_COMMAND_PRIORITY, LAST_COMMAND_TIME, TIME_DELAY, VALUE_SOURCE, TIME_OF_ACTIVE_TIME_RESET, VALUE_SOURCE_ARRAY, TIME_OF_STATE_COUNT_RESET, PROPERTY_LIST |
|
additionalProperties |
False |
|
GLOBAL_GROUP
type |
object |
|
properties |
||
|
type |
string |
enum |
GLOBAL_GROUP |
|
default |
GLOBAL_GROUP |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
COV_RESUBSCRIPTION_INTERVAL, ACKED_TRANSITIONS, EVENT_TIME_STAMPS, NOTIFY_TYPE, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, OUT_OF_SERVICE, NOTIFICATION_CLASS, GROUP_MEMBER_NAMES, MEMBER_STATUS_FLAGS, DESCRIPTION, REQUESTED_UPDATE_INTERVAL, COVU_PERIOD, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, EVENT_ALGORITHM_INHIBIT, EVENT_ENABLE, EVENT_ALGORITHM_INHIBIT_REF, EVENT_STATE, TIME_DELAY_NORMAL, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, PROFILE_NAME, STATUS_FLAGS, TIME_DELAY, PROPERTY_LIST, UPDATE_INTERVAL |
|
additionalProperties |
False |
|
ACCESS_ZONE
type |
object |
|
properties |
||
|
type |
string |
enum |
ACCESS_ZONE |
|
default |
ACCESS_ZONE |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
ACKED_TRANSITIONS, EVENT_TIME_STAMPS, GLOBAL_IDENTIFIER, ALARM_VALUES, NOTIFY_TYPE, CREDENTIALS_IN_ZONE, OBJECT_IDENTIFIER, ENTRY_POINTS, OBJECT_NAME, EXIT_POINTS, OBJECT_TYPE, OUT_OF_SERVICE, NOTIFICATION_CLASS, LAST_CREDENTIAL_ADDED, LAST_CREDENTIAL_ADDED_TIME, LAST_CREDENTIAL_REMOVED, LAST_CREDENTIAL_REMOVED_TIME, DESCRIPTION, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, OCCUPANCY_COUNT, EVENT_ALGORITHM_INHIBIT, EVENT_ENABLE, EVENT_ALGORITHM_INHIBIT_REF, EVENT_STATE, OCCUPANCY_COUNT_ENABLE, TIME_DELAY_NORMAL, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, OCCUPANCY_LOWER_LIMIT, RELIABILITY, OCCUPANCY_STATE, PROFILE_NAME, OCCUPANCY_UPPER_LIMIT, PASSBACK_MODE, PASSBACK_TIMEOUT, STATUS_FLAGS, ADJUST_VALUE, TIME_DELAY, PROPERTY_LIST |
|
additionalProperties |
False |
|
POSITIVE_INTEGER_VALUE
type |
object |
|
properties |
||
|
type |
string |
enum |
POSITIVE_INTEGER_VALUE |
|
default |
POSITIVE_INTEGER_VALUE |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
ACKED_TRANSITIONS, MAX_PRES_VALUE, EVENT_TIME_STAMPS, FAULT_HIGH_LIMIT, MIN_PRES_VALUE, FAULT_LOW_LIMIT, NOTIFY_TYPE, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, OUT_OF_SERVICE, NOTIFICATION_CLASS, PRESENT_VALUE, COV_INCREMENT, DEADBAND, DESCRIPTION, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, EVENT_ALGORITHM_INHIBIT, EVENT_ENABLE, EVENT_ALGORITHM_INHIBIT_REF, EVENT_STATE, TIME_DELAY_NORMAL, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, RELINQUISH_DEFAULT, PROFILE_NAME, RESOLUTION, HIGH_LIMIT, COMMAND_TIME_ARRAY, STATUS_FLAGS, CURRENT_COMMAND_PRIORITY, LAST_COMMAND_TIME, TIME_DELAY, VALUE_SOURCE, VALUE_SOURCE_ARRAY, PROPERTY_LIST, LIMIT_ENABLE, UNITS, LOW_LIMIT |
|
additionalProperties |
False |
|
TREND_LOG_MULTIPLE
type |
object |
|
properties |
||
|
type |
string |
enum |
TREND_LOG_MULTIPLE |
|
default |
TREND_LOG_MULTIPLE |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
ACKED_TRANSITIONS, ALIGN_INTERVALS, EVENT_TIME_STAMPS, INTERVAL_OFFSET, ENABLE, LOGGING_TYPE, LOG_INTERVAL, NOTIFY_TYPE, NOTIFICATION_THRESHOLD, OBJECT_IDENTIFIER, RECORDS_SINCE_NOTIFICATION, OBJECT_NAME, TRIGGER, RECORD_COUNT, START_TIME, OBJECT_TYPE, STOP_TIME, STOP_WHEN_FULL, TOTAL_RECORD_COUNT, NOTIFICATION_CLASS, DESCRIPTION, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, EVENT_ALGORITHM_INHIBIT, EVENT_ENABLE, EVENT_ALGORITHM_INHIBIT_REF, EVENT_STATE, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, PROFILE_NAME, LAST_NOTIFY_RECORD, STATUS_FLAGS, PROPERTY_LIST, BUFFER_SIZE |
|
additionalProperties |
False |
|
TIMER
type |
object |
|
properties |
||
|
type |
string |
enum |
TIMER |
|
default |
TIMER |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
ACKED_TRANSITIONS, MAX_PRES_VALUE, EVENT_TIME_STAMPS, MIN_PRES_VALUE, ALARM_VALUES, NOTIFY_TYPE, DEFAULT_TIMEOUT, INITIAL_TIMEOUT, OBJECT_IDENTIFIER, LAST_STATE_CHANGE, OBJECT_NAME, TIMER_RUNNING, TIMER_STATE, EXPIRATION_TIME, OBJECT_TYPE, OUT_OF_SERVICE, NOTIFICATION_CLASS, PRESENT_VALUE, PRIORITY_FOR_WRITING, DESCRIPTION, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, EVENT_ALGORITHM_INHIBIT, EVENT_ENABLE, EVENT_ALGORITHM_INHIBIT_REF, EVENT_STATE, TIME_DELAY_NORMAL, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, PROFILE_NAME, RESOLUTION, STATUS_FLAGS, TIME_DELAY, PROPERTY_LIST, UPDATE_TIME |
|
additionalProperties |
False |
|
FILE
type |
object |
|
properties |
||
|
type |
string |
enum |
FILE |
|
default |
FILE |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
READ_ONLY, PROFILE_LOCATION, MODIFICATION_DATE, PROFILE_NAME, FILE_ACCESS_METHOD, FILE_SIZE, OBJECT_IDENTIFIER, FILE_TYPE, OBJECT_NAME, ARCHIVE, RECORD_COUNT, OBJECT_TYPE, PROPERTY_LIST, DESCRIPTION |
|
additionalProperties |
False |
|
NETWORK_PORT
type |
object |
|
properties |
||
|
type |
string |
enum |
NETWORK_PORT |
|
default |
NETWORK_PORT |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
MAX_INFO_FRAMES, MAX_MASTER, NOTIFY_TYPE, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, OUT_OF_SERVICE, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, PROTOCOL_LEVEL, REFERENCE_PORT, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, STATUS_FLAGS, PROPERTY_LIST, ACKED_TRANSITIONS, EVENT_TIME_STAMPS, APDU_LENGTH, IP_ADDRESS, IP_DEFAULT_GATEWAY, NOTIFICATION_CLASS, IP_DHCP_ENABLE, IP_DHCP_LEASE_TIME, IP_DHCP_LEASE_TIME_REMAINING, IP_DHCP_SERVER, IP_DNS_SERVER, BACNET_IP_MODE, BACNET_IP_MULTICAST_ADDRESS, BACNET_IP_NAT_TRAVERSAL, IP_SUBNET_MASK, DESCRIPTION, BACNET_IP_UDP_PORT, BBMD_ACCEPT_FD_REGISTRATIONS, CHANGES_PENDING, COMMAND, FD_SUBSCRIPTION_LIFETIME, EVENT_ENABLE, LINK_SPEED, EVENT_STATE, LINK_SPEEDS, LINK_SPEED_AUTONEGOTIATE, MAC_ADDRESS, NETWORK_INTERFACE_NAME, PROFILE_NAME, NETWORK_NUMBER, AUTO_SLAVE_DISCOVERY, NETWORK_NUMBER_QUALITY, MANUAL_SLAVE_ADDRESS_BINDING, NETWORK_TYPE, SLAVE_ADDRESS_BINDING, SLAVE_PROXY_ENABLE, BACNET_IPV6_MODE, IPV6_ADDRESS, IPV6_PREFIX_LENGTH, BACNET_IPV6_UDP_PORT, IPV6_DEFAULT_GATEWAY, BACNET_IPV6_MULTICAST_ADDRESS, IPV6_DNS_SERVER, IPV6_AUTO_ADDRESSING_ENABLE, IPV6_DHCP_LEASE_TIME, IPV6_DHCP_LEASE_TIME_REMAINING, IPV6_DHCP_SERVER, IPV6_ZONE_INDEX |
|
additionalProperties |
False |
|
ANALOG_VALUE
type |
object |
|
properties |
||
|
type |
string |
enum |
ANALOG_VALUE |
|
default |
ANALOG_VALUE |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
ACKED_TRANSITIONS, MAX_PRES_VALUE, EVENT_TIME_STAMPS, FAULT_HIGH_LIMIT, MIN_PRES_VALUE, FAULT_LOW_LIMIT, NOTIFY_TYPE, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, OUT_OF_SERVICE, NOTIFICATION_CLASS, PRESENT_VALUE, COV_INCREMENT, DEADBAND, DESCRIPTION, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, EVENT_ALGORITHM_INHIBIT, EVENT_ENABLE, EVENT_ALGORITHM_INHIBIT_REF, EVENT_STATE, TIME_DELAY_NORMAL, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, RELINQUISH_DEFAULT, PROFILE_NAME, RESOLUTION, HIGH_LIMIT, COMMAND_TIME_ARRAY, STATUS_FLAGS, CURRENT_COMMAND_PRIORITY, LAST_COMMAND_TIME, TIME_DELAY, VALUE_SOURCE, VALUE_SOURCE_ARRAY, PROPERTY_LIST, LIMIT_ENABLE, UNITS, LOW_LIMIT |
|
additionalProperties |
False |
|
BINARY_INPUT
type |
object |
|
properties |
||
|
type |
string |
enum |
BINARY_INPUT |
|
default |
BINARY_INPUT |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
ACKED_TRANSITIONS, EVENT_TIME_STAMPS, INTERFACE_VALUE, ACTIVE_TEXT, ALARM_VALUE, NOTIFY_TYPE, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, CHANGE_OF_STATE_COUNT, CHANGE_OF_STATE_TIME, OUT_OF_SERVICE, NOTIFICATION_CLASS, POLARITY, PRESENT_VALUE, DESCRIPTION, DEVICE_TYPE, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, ELAPSED_ACTIVE_TIME, EVENT_DETECTION_ENABLE, EVENT_ALGORITHM_INHIBIT, EVENT_ENABLE, EVENT_ALGORITHM_INHIBIT_REF, EVENT_STATE, TIME_DELAY_NORMAL, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, PROFILE_NAME, INACTIVE_TEXT, STATUS_FLAGS, TIME_DELAY, TIME_OF_ACTIVE_TIME_RESET, TIME_OF_STATE_COUNT_RESET, PROPERTY_LIST |
|
additionalProperties |
False |
|
PULSE_CONVERTER
type |
object |
|
properties |
||
|
type |
string |
enum |
PULSE_CONVERTER |
|
default |
PULSE_CONVERTER |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
ACKED_TRANSITIONS, EVENT_TIME_STAMPS, NOTIFY_TYPE, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, OUT_OF_SERVICE, NOTIFICATION_CLASS, PRESENT_VALUE, COV_INCREMENT, DEADBAND, DESCRIPTION, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, EVENT_ALGORITHM_INHIBIT, EVENT_ENABLE, EVENT_ALGORITHM_INHIBIT_REF, EVENT_STATE, TIME_DELAY_NORMAL, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, PROFILE_NAME, HIGH_LIMIT, STATUS_FLAGS, ADJUST_VALUE, COUNT, TIME_DELAY, COUNT_BEFORE_CHANGE, COUNT_CHANGE_TIME, PROPERTY_LIST, COV_PERIOD, LIMIT_ENABLE, INPUT_REFERENCE, UNITS, LOW_LIMIT, SCALE_FACTOR, UPDATE_TIME |
|
additionalProperties |
False |
|
TIME_PATTERN_VALUE
type |
object |
|
properties |
||
|
type |
string |
enum |
TIME_PATTERN_VALUE |
|
default |
TIME_PATTERN_VALUE |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
ACKED_TRANSITIONS, EVENT_TIME_STAMPS, NOTIFY_TYPE, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, OUT_OF_SERVICE, NOTIFICATION_CLASS, PRESENT_VALUE, DESCRIPTION, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, EVENT_ENABLE, EVENT_STATE, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, RELINQUISH_DEFAULT, PROFILE_NAME, COMMAND_TIME_ARRAY, STATUS_FLAGS, CURRENT_COMMAND_PRIORITY, LAST_COMMAND_TIME, VALUE_SOURCE, VALUE_SOURCE_ARRAY, PROPERTY_LIST |
|
additionalProperties |
False |
|
LIGHTING_OUTPUT
type |
object |
|
properties |
||
|
type |
string |
enum |
LIGHTING_OUTPUT |
|
default |
LIGHTING_OUTPUT |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
MIN_ACTUAL_VALUE, POWER, TRANSITION, EGRESS_ACTIVE, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, OUT_OF_SERVICE, PRESENT_VALUE, COV_INCREMENT, DESCRIPTION, TRACKING_VALUE, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, FEEDBACK_VALUE, RELINQUISH_DEFAULT, PROFILE_NAME, COMMAND_TIME_ARRAY, STATUS_FLAGS, CURRENT_COMMAND_PRIORITY, LAST_COMMAND_TIME, VALUE_SOURCE, VALUE_SOURCE_ARRAY, PROPERTY_LIST, BLINK_WARN_ENABLE, DEFAULT_FADE_TIME, DEFAULT_RAMP_RATE, DEFAULT_STEP_INCREMENT, EGRESS_TIME, IN_PROGRESS, INSTANTANEOUS_POWER, LIGHTING_COMMAND_DEFAULT_PRIORITY, MAX_ACTUAL_VALUE |
|
additionalProperties |
False |
|
ACCESS_DOOR
type |
object |
|
properties |
||
|
type |
string |
enum |
ACCESS_DOOR |
|
default |
ACCESS_DOOR |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
ACKED_TRANSITIONS, EVENT_TIME_STAMPS, ALARM_VALUES, NOTIFY_TYPE, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, OUT_OF_SERVICE, NOTIFICATION_CLASS, PRESENT_VALUE, DESCRIPTION, MAINTENANCE_REQUIRED, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, DOOR_ALARM_STATE, EVENT_ALGORITHM_INHIBIT, DOOR_EXTENDED_PULSE_TIME, EVENT_ENABLE, EVENT_ALGORITHM_INHIBIT_REF, EVENT_STATE, DOOR_MEMBERS, TIME_DELAY_NORMAL, DOOR_OPEN_TOO_LONG_TIME, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, DOOR_PULSE_TIME, RELIABILITY, DOOR_STATUS, FAULT_VALUES, RELINQUISH_DEFAULT, DOOR_UNLOCK_DELAY_TIME, PROFILE_NAME, LOCK_STATUS, MASKED_ALARM_VALUES, SECURED_STATUS, COMMAND_TIME_ARRAY, STATUS_FLAGS, CURRENT_COMMAND_PRIORITY, LAST_COMMAND_TIME, TIME_DELAY, VALUE_SOURCE, VALUE_SOURCE_ARRAY, PROPERTY_LIST |
|
additionalProperties |
False |
|
ALERT_ENROLLMENT
type |
object |
|
properties |
||
|
type |
string |
enum |
ALERT_ENROLLMENT |
|
default |
ALERT_ENROLLMENT |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
EVENT_MESSAGE_TEXTS, ACKED_TRANSITIONS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, EVENT_TIME_STAMPS, EVENT_ALGORITHM_INHIBIT, EVENT_ENABLE, EVENT_ALGORITHM_INHIBIT_REF, EVENT_STATE, PROFILE_LOCATION, NOTIFY_TYPE, PROFILE_NAME, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, NOTIFICATION_CLASS, PROPERTY_LIST, PRESENT_VALUE, DESCRIPTION |
|
additionalProperties |
False |
|
CHARACTERSTRING_VALUE
type |
object |
|
properties |
||
|
type |
string |
enum |
CHARACTERSTRING_VALUE |
|
default |
CHARACTERSTRING_VALUE |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
ACKED_TRANSITIONS, EVENT_TIME_STAMPS, ALARM_VALUES, NOTIFY_TYPE, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, OUT_OF_SERVICE, NOTIFICATION_CLASS, PRESENT_VALUE, DESCRIPTION, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, EVENT_ALGORITHM_INHIBIT, EVENT_ENABLE, EVENT_ALGORITHM_INHIBIT_REF, EVENT_STATE, TIME_DELAY_NORMAL, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, FAULT_VALUES, RELINQUISH_DEFAULT, PROFILE_NAME, COMMAND_TIME_ARRAY, STATUS_FLAGS, CURRENT_COMMAND_PRIORITY, LAST_COMMAND_TIME, TIME_DELAY, VALUE_SOURCE, VALUE_SOURCE_ARRAY, PROPERTY_LIST |
|
additionalProperties |
False |
|
EVENT_LOG
type |
object |
|
properties |
||
|
type |
string |
enum |
EVENT_LOG |
|
default |
EVENT_LOG |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
ACKED_TRANSITIONS, EVENT_TIME_STAMPS, ENABLE, NOTIFY_TYPE, NOTIFICATION_THRESHOLD, OBJECT_IDENTIFIER, RECORDS_SINCE_NOTIFICATION, OBJECT_NAME, RECORD_COUNT, START_TIME, OBJECT_TYPE, STOP_TIME, STOP_WHEN_FULL, TOTAL_RECORD_COUNT, NOTIFICATION_CLASS, DESCRIPTION, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, EVENT_ALGORITHM_INHIBIT, EVENT_ENABLE, EVENT_ALGORITHM_INHIBIT_REF, EVENT_STATE, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, PROFILE_NAME, LAST_NOTIFY_RECORD, STATUS_FLAGS, PROPERTY_LIST, BUFFER_SIZE |
|
additionalProperties |
False |
|
CALENDAR
type |
object |
|
properties |
||
|
type |
string |
enum |
CALENDAR |
|
default |
CALENDAR |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
OBJECT_TYPE, PROPERTY_LIST, PRESENT_VALUE, PROFILE_LOCATION, PROFILE_NAME, OBJECT_IDENTIFIER, DESCRIPTION, OBJECT_NAME |
|
additionalProperties |
False |
|
MULTI_STATE_INPUT
type |
object |
|
properties |
||
|
type |
string |
enum |
MULTI_STATE_INPUT |
|
default |
MULTI_STATE_INPUT |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
ACKED_TRANSITIONS, EVENT_TIME_STAMPS, INTERFACE_VALUE, ALARM_VALUES, NOTIFY_TYPE, NUMBER_OF_STATES, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, OUT_OF_SERVICE, NOTIFICATION_CLASS, PRESENT_VALUE, DESCRIPTION, DEVICE_TYPE, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, EVENT_ALGORITHM_INHIBIT, EVENT_ENABLE, EVENT_ALGORITHM_INHIBIT_REF, EVENT_STATE, TIME_DELAY_NORMAL, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, FAULT_VALUES, PROFILE_NAME, STATE_TEXT, STATUS_FLAGS, TIME_DELAY, PROPERTY_LIST |
|
additionalProperties |
False |
|
DATE_VALUE
type |
object |
|
properties |
||
|
type |
string |
enum |
DATE_VALUE |
|
default |
DATE_VALUE |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
ACKED_TRANSITIONS, EVENT_TIME_STAMPS, NOTIFY_TYPE, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, OUT_OF_SERVICE, NOTIFICATION_CLASS, PRESENT_VALUE, DESCRIPTION, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, EVENT_ENABLE, EVENT_STATE, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, RELINQUISH_DEFAULT, PROFILE_NAME, COMMAND_TIME_ARRAY, STATUS_FLAGS, CURRENT_COMMAND_PRIORITY, LAST_COMMAND_TIME, VALUE_SOURCE, VALUE_SOURCE_ARRAY, PROPERTY_LIST |
|
additionalProperties |
False |
|
ESCALATOR
type |
object |
|
properties |
||
|
type |
string |
enum |
ESCALATOR |
|
default |
ESCALATOR |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
ACKED_TRANSITIONS, EVENT_TIME_STAMPS, NOTIFY_TYPE, OBJECT_IDENTIFIER, ELEVATOR_GROUP, ENERGY_METER, OBJECT_NAME, ENERGY_METER_REF, ESCALATOR_MODE, OBJECT_TYPE, FAULT_SIGNALS, GROUP_ID, OUT_OF_SERVICE, NOTIFICATION_CLASS, INSTALLATION_ID, DESCRIPTION, OPERATION_DIRECTION, PASSENGER_ALARM, POWER_MODE, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, EVENT_ALGORITHM_INHIBIT, EVENT_ENABLE, EVENT_ALGORITHM_INHIBIT_REF, TIME_DELAY_NORMAL, EVENT_STATE, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, PROFILE_NAME, STATUS_FLAGS, TIME_DELAY, PROPERTY_LIST |
|
additionalProperties |
False |
|
MULTI_STATE_VALUE
type |
object |
|
properties |
||
|
type |
string |
enum |
MULTI_STATE_VALUE |
|
default |
MULTI_STATE_VALUE |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
ACKED_TRANSITIONS, EVENT_TIME_STAMPS, ALARM_VALUES, NOTIFY_TYPE, NUMBER_OF_STATES, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, OUT_OF_SERVICE, NOTIFICATION_CLASS, PRESENT_VALUE, DESCRIPTION, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, EVENT_ALGORITHM_INHIBIT, EVENT_ENABLE, EVENT_ALGORITHM_INHIBIT_REF, EVENT_STATE, TIME_DELAY_NORMAL, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, FAULT_VALUES, RELINQUISH_DEFAULT, PROFILE_NAME, STATE_TEXT, COMMAND_TIME_ARRAY, STATUS_FLAGS, CURRENT_COMMAND_PRIORITY, LAST_COMMAND_TIME, TIME_DELAY, VALUE_SOURCE, VALUE_SOURCE_ARRAY, PROPERTY_LIST |
|
additionalProperties |
False |
|
CREDENTIAL_DATA_INPUT
type |
object |
|
properties |
||
|
type |
string |
enum |
CREDENTIAL_DATA_INPUT |
|
default |
CREDENTIAL_DATA_INPUT |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
ACKED_TRANSITIONS, EVENT_TIME_STAMPS, NOTIFY_TYPE, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, OUT_OF_SERVICE, NOTIFICATION_CLASS, DESCRIPTION, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, EVENT_ENABLE, EVENT_STATE, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, PROFILE_NAME, STATUS_FLAGS, SUPPORTED_FORMAT_CLASSES, PROPERTY_LIST, UPDATE_TIME |
|
additionalProperties |
False |
|
OCTETSTRING_VALUE
type |
object |
|
properties |
||
|
type |
string |
enum |
OCTETSTRING_VALUE |
|
default |
OCTETSTRING_VALUE |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
EVENT_STATE, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, RELINQUISH_DEFAULT, PROFILE_NAME, OBJECT_IDENTIFIER, OBJECT_NAME, COMMAND_TIME_ARRAY, OBJECT_TYPE, STATUS_FLAGS, CURRENT_COMMAND_PRIORITY, LAST_COMMAND_TIME, OUT_OF_SERVICE, VALUE_SOURCE, VALUE_SOURCE_ARRAY, PROPERTY_LIST, PRESENT_VALUE, DESCRIPTION |
|
additionalProperties |
False |
|
COMMAND
type |
object |
|
properties |
||
|
type |
string |
enum |
COMMAND |
|
default |
COMMAND |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
ACKED_TRANSITIONS, EVENT_TIME_STAMPS, ACTION_TEXT, NOTIFY_TYPE, ALL_WRITES_SUCCESSFUL, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, NOTIFICATION_CLASS, PRESENT_VALUE, DESCRIPTION, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, EVENT_ENABLE, EVENT_STATE, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, PROFILE_NAME, IN_PROCESS, STATUS_FLAGS, VALUE_SOURCE, PROPERTY_LIST |
|
additionalProperties |
False |
|
SCHEDULE
type |
object |
|
properties |
||
|
type |
string |
enum |
SCHEDULE |
|
default |
SCHEDULE |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
ACKED_TRANSITIONS, EVENT_TIME_STAMPS, NOTIFY_TYPE, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, OUT_OF_SERVICE, NOTIFICATION_CLASS, PRIORITY_FOR_WRITING, DESCRIPTION, EVENT_MESSAGE_TEXTS, EFFECTIVE_PERIOD, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, EVENT_ENABLE, EVENT_STATE, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, PROFILE_NAME, STATUS_FLAGS, PROPERTY_LIST |
|
additionalProperties |
False |
|
TIME_VALUE
type |
object |
|
properties |
||
|
type |
string |
enum |
TIME_VALUE |
|
default |
TIME_VALUE |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
ACKED_TRANSITIONS, EVENT_TIME_STAMPS, NOTIFY_TYPE, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, OUT_OF_SERVICE, NOTIFICATION_CLASS, PRESENT_VALUE, DESCRIPTION, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, EVENT_ENABLE, EVENT_STATE, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, RELINQUISH_DEFAULT, PROFILE_NAME, COMMAND_TIME_ARRAY, STATUS_FLAGS, CURRENT_COMMAND_PRIORITY, LAST_COMMAND_TIME, VALUE_SOURCE, VALUE_SOURCE_ARRAY, PROPERTY_LIST |
|
additionalProperties |
False |
|
BINARY_VALUE
type |
object |
|
properties |
||
|
type |
string |
enum |
BINARY_VALUE |
|
default |
BINARY_VALUE |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
ACKED_TRANSITIONS, MINIMUM_OFF_TIME, EVENT_TIME_STAMPS, MINIMUM_ON_TIME, ACTIVE_TEXT, ALARM_VALUE, NOTIFY_TYPE, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, CHANGE_OF_STATE_COUNT, CHANGE_OF_STATE_TIME, OUT_OF_SERVICE, NOTIFICATION_CLASS, PRESENT_VALUE, DESCRIPTION, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, ELAPSED_ACTIVE_TIME, EVENT_DETECTION_ENABLE, EVENT_ALGORITHM_INHIBIT, EVENT_ENABLE, EVENT_ALGORITHM_INHIBIT_REF, EVENT_STATE, TIME_DELAY_NORMAL, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, RELINQUISH_DEFAULT, PROFILE_NAME, INACTIVE_TEXT, COMMAND_TIME_ARRAY, STATUS_FLAGS, CURRENT_COMMAND_PRIORITY, LAST_COMMAND_TIME, TIME_DELAY, VALUE_SOURCE, TIME_OF_ACTIVE_TIME_RESET, VALUE_SOURCE_ARRAY, TIME_OF_STATE_COUNT_RESET, PROPERTY_LIST |
|
additionalProperties |
False |
|
ANALOG_INPUT
type |
object |
|
properties |
||
|
type |
string |
enum |
ANALOG_INPUT |
|
default |
ANALOG_INPUT |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
ACKED_TRANSITIONS, MAX_PRES_VALUE, EVENT_TIME_STAMPS, INTERFACE_VALUE, FAULT_HIGH_LIMIT, MIN_PRES_VALUE, FAULT_LOW_LIMIT, NOTIFY_TYPE, OBJECT_IDENTIFIER, OBJECT_NAME, OBJECT_TYPE, OUT_OF_SERVICE, NOTIFICATION_CLASS, PRESENT_VALUE, COV_INCREMENT, DEADBAND, DESCRIPTION, DEVICE_TYPE, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, EVENT_ALGORITHM_INHIBIT, EVENT_ENABLE, EVENT_ALGORITHM_INHIBIT_REF, EVENT_STATE, TIME_DELAY_NORMAL, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, PROFILE_NAME, RESOLUTION, HIGH_LIMIT, STATUS_FLAGS, TIME_DELAY, PROPERTY_LIST, LIMIT_ENABLE, UNITS, UPDATE_INTERVAL, LOW_LIMIT |
|
additionalProperties |
False |
|
TREND_LOG
type |
object |
|
properties |
||
|
type |
string |
enum |
TREND_LOG |
|
default |
TREND_LOG |
|
|
A array index is necessary if the value bacnet is an array. Otherwise let empty. |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
Used to uniquely identify an instance of a BACnet object type within a device. In BACnet, multiple objects of the same type can exist within a single device. For example, a device might have several analog input points (e.g., different temperature sensors). For instance, you might want to read the temperature from the first sensor (ANALOG_INPUT with instance 0) and humidity from the second sensor (ANALOG_INPUT with instance 1). |
|
type |
integer |
|
maximum |
4194303 |
|
minimum |
0 |
|
|
The supported property types are listed below. If you need a property that isn’t included in this list, use the RAW type. Refer to the documentation for details on how to use it.
|
|
type |
string |
|
enum |
COV_RESUBSCRIPTION_INTERVAL, ACKED_TRANSITIONS, ALIGN_INTERVALS, EVENT_TIME_STAMPS, INTERVAL_OFFSET, ENABLE, LOGGING_TYPE, LOG_INTERVAL, NOTIFY_TYPE, NOTIFICATION_THRESHOLD, OBJECT_IDENTIFIER, RECORDS_SINCE_NOTIFICATION, OBJECT_NAME, RECORD_COUNT, TRIGGER, START_TIME, OBJECT_TYPE, STOP_TIME, STOP_WHEN_FULL, TOTAL_RECORD_COUNT, NOTIFICATION_CLASS, DESCRIPTION, EVENT_MESSAGE_TEXTS, EVENT_MESSAGE_TEXTS_CONFIG, EVENT_DETECTION_ENABLE, EVENT_ALGORITHM_INHIBIT, EVENT_ENABLE, EVENT_ALGORITHM_INHIBIT_REF, EVENT_STATE, RELIABILITY_EVALUATION_INHIBIT, PROFILE_LOCATION, RELIABILITY, PROFILE_NAME, LAST_NOTIFY_RECORD, STATUS_FLAGS, PROPERTY_LIST, BUFFER_SIZE |
|
additionalProperties |
False |
|